Most products are directly from factories, buy more would get better price

5V 9mm IP68 addressable WS2811 round 50 nodes RGB LED pixel light

In stock
  • Buy 100 for $6.75 each and save 15%
  • Buy 1000 for $5.95 each and save 25%

Maximum 200 characters

Model: LM-WS2811

intelligent individually addressable programmable WS2811 IC, RGB color, 256 scales, this string has 50 node pixels with waterproof connector, 5mm F5 RGLED, 9mm small open punch through-hole, excellent performance

DC 5V working voltage, safe assurance

made in Shenzhen, reliable quality with 2 years warranty

We are professional on LED light products, you can customize with special requirements. For any questions on product specifications, production time or shipping methods, please feel free to contact us 



Working voltage: DC 5V

Current: 60 mA

Power consumption: 0.3W

Working temperature: -40°C~ 60°C

Protection grade: IP68 waterproof

Dimension: 9mm small through-hole, higher resolution than 12mm punching hole

LED type: 1 piece of 5mm F5 RGB strawhat LED, smaller than 8mm F8 strawhat LED

LED quantity: 1 piece

Viewing angle: >90 degrees

Lifespan: MTBF>50000 hours



Programable by Software

Individually control

Conformal coating, PVC glue protection

IP68 waterproof protection rate

Easy installation (punching 9mm hole on metal panel)

50 pieces per string



Meets the general lighting, environment such as: outdoors advertising, Christmas decoration 

RGB pixels are digitally controllable lights you can set to any color, or animate.

Each RGB LED and controller chip is molded into a 'dot' of silicone, the dots are waterproof and rugged.

There are four flanges moulded in so that you can 'push' them into a 9mm drill hole in any material up to 1.5mm/0.06" thick.

They are typically used to make outdoor signs. Compared to our other 20mm LED dots.

These are diffused 5mm LEDs so they are not as bright but they color mix a little nicer.

A 3-conductor cable connects the pixels.

Each dot is digitally controlled, with an internal 5-bit PWM LED driver (15 bit color for 32,768 different shades). The pixels must be clocked by a micro controller. 

The pixels use 5mm diffused RGB LEDs with brightness of about 300 mcd per individual R/G/B LED


9mm through-hole WS2811 RGB LED pixel node light string and WF300 SPI RGB LED controller


9mm through-hole WS2811 RGB LED pixel node light string and WF300 SPI LED controller


9mm through-hole WS2811 RGB LED pixel node light string and digital WF300 SPI LED controller


Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© 2009~2024 Kutop international limited. All Rights Reserved.