DMX200 DMX-SPI digital signal LED decoder

Click here to view the detailed DMX200 SPI decoder information

Summarization

The DMX-SPI decoder adopts the advanced micro control unit, it receives standard DMX-512 digital control signal that is widely used in the international and transformes it into SPI signal to drive LED, it supports 10 kinds of different model of lights, at the same time the port of DMX signal has lightning protection measures; you could connect the DMX decoder with DMX digital console to achieve dimming or various changes in procedures. Not connected with DMX console, you can choose select the built-in 35 kinds of default patterns through the mode button, the default points is 1024.

Controller

Working temperature: -20~60 Celsius

Input voltage: DC 5~24V

Output: SPI signal (DATA, CLK)

External dimension: L175 x W53 x H27(mm)

Packing size: L180 x W58 x H55(mm)

Net weight: 257g

Gross weight: 293g

Max output: 480W

parameters settings of decoder

You can modify the light type that decoder supports through the DIP switch. The decoder can support 10 kinds of SPI strips in market. As follows:

If there are 2 signal lines, then you need to connect the ground wire, clock line, data line with GND CLK DATA; if it is 1 signal line, then just need to connect the ground wire, data line with GND DATA.

Remark: if the V+ voltage of strip is the same with controller input voltage, then it can directly connect with the controller V+; if not, you need to connect another power supply.

Since the specifications of light in the market are different, the sequence of RGB may be different, the sequence of some lights is RGB, some sequence is RBG, GRB and so on, so the  DIP switch provides modification of RGB sequence.

Mode changes are as the following table: